MAX706CUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 350μA |
| Max Supply Current | 350μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX706CUA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tube-packaging is used. In this IC power you will find 1 functions for you to refer to. This power management is made up of 2 channels which are available in a series format. For your reference, this PMIC includes a list of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 5V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. 8 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. We recommend setting the supervisors to 0°C~70°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 350μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by MAX706. The voltage supervisor requires a power source of 5V volts in order to work correctly. At the most, voltage supervisor can work with a supply temperature of 350μA.
MAX706CUA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
350μA operating supply current
MAX706CUA+ Applications
There are a lot of Maxim Integrated MAX706CUA+ Voltage Supervisors applications.
- Consumer electronics
- Network equipment
- Embedded computing
- Dash board
- Linux and server computing
- Rechargeable batteries
- Set top box
- Important electronics for automotive safety
- Precision measurement
- Unattended substation automation
