MAX706EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 500μA |
| Max Supply Current | 500μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX706EPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tube model. The purpose of this IC management is to provide you with a reference of 1 functions. There are 2 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management' mounting is recommended to be done with the Through Hole type of mounting. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 500μA. A similar IC managements number of the manufacturer can always be found by using MAX706, the base power ics number. To be able to work, this power management requires 5V volts of power. The maximum supply temperature is 500μA.
MAX706EPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500μA operating supply current
MAX706EPA+ Applications
There are a lot of Maxim Integrated MAX706EPA+ Voltage Supervisors applications.
- Electric heating appliances
- Stable power system
- Data storage applications
- Power distribution systems of operating room
- Power communication system
- Automotive power systems
- Functional modules
- DC stabilized power supply module
- Kitchen appliances
- Electronics installed in the vehicle
