banner_page

MAX706ESA+

5V8 Terminals 8-Pin MAX706 Voltage supervisor2 Channels Min 1.2V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX706ESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 511
  • Description: 5V8 Terminals 8-Pin MAX706 Voltage supervisor2 Channels Min 1.2V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2003
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 471mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX706
Output Push-Pull, Totem Pole
Pin Count 8
Power Supplies 5V
Number of Channels 2
Max Supply Voltage 5.5V
Min Supply Voltage 1.2V
Operating Supply Current 500μA
Nominal Supply Current 150μA
Max Supply Current 500μA
Adjustable Threshold YES
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 4.4V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.25V
Max Reset Threshold Voltage 4.5V
Undervoltage Threshold 4.25V
Overvoltage Threshold 4.5V
Height 1.5mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX706ESA+ Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tube-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 2 channels on this supervisor, and they are arranged in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. 8 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~85°C TA . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 500μA. A similar IC managements number of the manufacturer can always be found by using MAX706, the base power ics number. In order to operate this power management, it requires 5V volts of power. At the most, voltage supervisor can work with a supply temperature of 500μA.

MAX706ESA+ Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500μA operating supply current

MAX706ESA+ Applications


There are a lot of Maxim Integrated MAX706ESA+ Voltage Supervisors applications.

  • Smart meter
  • External alarm
  • Magnetic resonance imaging
  • Efficient information transmission
  • emergency room
  • Important electronics for automotive safety
  • Power distribution systems of operating room
  • Important electronics for automotive protection
  • Medical-specific isolation transformer
  • Battery-powered equipment

Write a review

Note: HTML is not translated!
    Bad           Good