MAX706PESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470.6mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Output Current | 20mA |
| Adjustable Threshold | NO |
| Reset | Active High |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.5mA |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX706PESA+ Overview
It is mounted through 8 terminals on the power management. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 3 channels that can be found. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. When 3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. 8 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There are other features such as WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR to name a few. A similar IC managements number of the manufacturer can always be found by using MAX706, the base power ics number. To be able to work, this power management requires 3/5V volts of power.
MAX706PESA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
MAX706PESA+ Applications
There are a lot of Maxim Integrated MAX706PESA+ Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Automotive power systems
- DVR
- Computer applications
- Insulation fault location system
- Household appliances
- Fire equipment power monitoring system
- WiFi router
- Battery cars
- Electronics installed in the vehicle
