MAX706RCSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470.6mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 135μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.35mA |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX706RCSA+ Overview
There are 8 terminals on this power management that allow it to be mounted. Packaged in the form of a Tube, power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power management is made up of 3 channels which are available in a series format. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. 8 pins are present in total in this power management. 8 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 135μA supply current present in the power management. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX706, which is the base power ics number. There is a requirement for 3.3/5V power to power this power management.
MAX706RCSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
135μA operating supply current
MAX706RCSA+ Applications
There are a lot of Maxim Integrated MAX706RCSA+ Voltage Supervisors applications.
- Power distribution systems of CCU
- Kitchen appliances
- Microcontroller system
- Power distribution systems of ICU
- Automotive permanent magnet synchronous motors
- Efficient information transmission
- Important electronics for automotive protection
- emergency room
- Automotive power systems
- Radar
