banner_page

MAX706RCSA+T

3V8 Terminals 8-Pin MAX706 Voltage supervisor3 Channels Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX706RCSA+T
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 232
  • Description: 3V8 Terminals 8-Pin MAX706 Voltage supervisor3 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Supply Current-Max (Isup) 0.35mA
Min Reset Threshold Voltage 2.55V
Max Reset Threshold Voltage 2.7V
Undervoltage Threshold 2.55V
Overvoltage Threshold 2.7V
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tape & Reel (TR)
Published 2010
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Additional Feature WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR
Subcategory Power Management Circuits
Max Power Dissipation 470.6mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Base Part Number MAX706
Output Push-Pull, Totem Pole
Pin Count 8
Power Supplies 3.3/5V
Number of Channels 3
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 135μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 2.63V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum

MAX706RCSA+T Overview


Power management is mounted through 8 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. There are 3 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 3V. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. Power managment ic pin count is 8. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: 0°C~70°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 135μA. As well as this, there are other features to mention such as [0], for example. A similar IC managements number of the manufacturer can always be found by using MAX706, the base power ics number. A power supply of 3.3/5V watts is required for the operation of this power management.

MAX706RCSA+T Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
135μA operating supply current

MAX706RCSA+T Applications


There are a lot of Maxim Integrated MAX706RCSA+T Voltage Supervisors applications.

  • Set top box
  • Detection of phase loss
  • Automotive permanent magnet synchronous motors
  • Magnetic resonance imaging
  • Stable power system
  • Satellite navigation
  • Rechargeable batteries
  • Telecommunications equipment
  • Analog circuit
  • Transformer load monitoring equipment

Write a review

Note: HTML is not translated!
    Bad           Good