MAX706RESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470.6mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 135μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.5mA |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX706RESA+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. Power management consists of 3 channels, each of which can be used independently. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 3V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. 8 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 135μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by MAX706. A power supply of 3.3/5V watts is required for the operation of this power management.
MAX706RESA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
135μA operating supply current
MAX706RESA+T Applications
There are a lot of Maxim Integrated MAX706RESA+T Voltage Supervisors applications.
- Telecommunications equipment
- Dash board
- Unattended substation automation
- Microcontroller system
- Military electronics
- Transformer load monitoring equipment
- Data storage applications
- Medical-specific insulation monitor
- Low voltage/high power - AI, GPU
- Sensitive sensors
