MAX706SESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470.6mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Output Type | Adjustable |
| Power Supplies | 3.3/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 135μA |
| Power Dissipation | 471mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.5mA |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX706SESA+ Overview
There are 8 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tube. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 3 channels that can be found. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 8 pins in it. The pins of the power management system count 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The power management's supply current is 135μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. For similar manage ics search of the manufacturer, you can always refer to MAX706, the base PMIC number. There is a requirement for 3.3/5V power to power this power management.
MAX706SESA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
135μA operating supply current
MAX706SESA+ Applications
There are a lot of Maxim Integrated MAX706SESA+ Voltage Supervisors applications.
- External alarm
- WiFi router
- Electric heating appliances
- Power distribution systems of ICU
- Digitally controlled LDO regulators circuit
- Rechargeable batteries
- Urban rail transit weak current power monitoring
- Detection of phase sequence
- Cloud computing
- Leakage current detection
