MAX706TCSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470.6mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 135μA |
| Nominal Supply Current | 135μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.35mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX706TCSA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. There are 3 channels on this power managment ic that can be found in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3V volt supply. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. This power management has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to 0°C~70°C TA degrees. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Supplied with a operating current of 135μA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX706, which is the base power ics number. The power management must be powered by 3.3/5V volts to function properly.
MAX706TCSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
135μA operating supply current
MAX706TCSA+ Applications
There are a lot of Maxim Integrated MAX706TCSA+ Voltage Supervisors applications.
- Battery cars
- Fire equipment power monitoring system
- External alarm
- Data storage applications
- Power distribution systems of ICU
- Consumer electronics
- Efficient information transmission
- Electric heating appliances
- Kitchen appliances
- Power communication system
