MAX706TCSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 470.6mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 135μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.35mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX706TCSA+T Overview
As you can see, this power management is mounted through 8 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 3 channels. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 3V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 8. There are 8 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 135μA. Power management is also possible to add other features such as WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR to name a few. A similar IC managements number of the manufacturer can always be found by using MAX706, the base power ics number. To be able to work, this power management requires 3.3/5V volts of power.
MAX706TCSA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
135μA operating supply current
MAX706TCSA+T Applications
There are a lot of Maxim Integrated MAX706TCSA+T Voltage Supervisors applications.
- Battery cars
- Urban rail transit weak current power monitoring
- Smart meter
- Military electronics
- Functional modules
- Important electronics for automotive safety
- Dash board
- Utility meter
- Detection of phase imbalance
- Leakage protection
