MAX706TEUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Additional Feature | WATCHDOG TIMER, MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 362mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 135μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.5mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX706TEUA+T Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 3V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 8 pins. There are 8 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 135μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use MAX706, the base supervisor number, to search for similar PMICs of the manufacturer. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate.
MAX706TEUA+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
135μA operating supply current
MAX706TEUA+T Applications
There are a lot of Maxim Integrated MAX706TEUA+T Voltage Supervisors applications.
- Battery cars
- Electrical fire monitoring system
- Military communications
- Multi-voltage system
- Refrigeration
- Consumer electronics
- Transformer load monitoring equipment
- Personal computers
- Sensitive sensors
- External alarm
