MAX708CSA+
| Parameters | |
|---|---|
| Max Output Current | 20mA |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 471mW |
| Max Supply Current | 350μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | +4.4V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
MAX708CSA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tube. For your reference, this IC power includes a list of 1 functions. There are a total of 2 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 5V volt supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 8 pins in it. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. The supervisor's supply current is specified to 350μA. For similar manage ics search of the manufacturer, you can always refer to MAX708, the base PMIC number. A power supply of 5V watts is required for the operation of this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 350μA.
MAX708CSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
350μA operating supply current
MAX708CSA+ Applications
There are a lot of Maxim Integrated MAX708CSA+ Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Power distribution systems of infant care room
- Household appliances
- Leakage protection
- Network equipment
- Automotive power systems
- Consumer electronics
- Leakage current detection
- Detection of phase sequence
- External alarm
