MAX708CUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 350μA |
| Max Supply Current | 350μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX708CUA+ Overview
There are 8 terminals on this power management that allow it to be mounted. Tube-packaging is used. For your reference, this IC power includes a list of 1 functions. A series of 2 channels can be found on this supervisor. Please find attached 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 8 pins. There are 8 pins on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThis power management is the recommended temperature range for the supervisors: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. Supplied with a operating current of 350μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to MAX708, the base PMIC number. It requires 5V watts of power to operate this voltage supervisor. Voltage supervisor can work with a supply temperature of 350μA at the most.
MAX708CUA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
350μA operating supply current
MAX708CUA+ Applications
There are a lot of Maxim Integrated MAX708CUA+ Voltage Supervisors applications.
- Important electronics for automotive safety
- Sensitive sensors
- Military communications
- DSP
- Power distribution systems of operating room
- Electrical fire monitoring system
- Battery-powered equipment
- Microprocessor system
- Electronics installed in the vehicle
- emergency room
