MAX708ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 500μA |
| Max Supply Current | 500μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | +4.4V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX708ESA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 2 channels available on this supervisor, and each channel has a different function. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 8 pins in it. 8 pins are on the supervisor. IC management can only work with a supply voltage of 1.2V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. The power management's supply current is 500μA. To find similar IC managements from the manufacturer, you can always search by MAX708. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. Voltage supervisor can work with a supply temperature of 500μA at the most.
MAX708ESA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
500μA operating supply current
MAX708ESA+ Applications
There are a lot of Maxim Integrated MAX708ESA+ Voltage Supervisors applications.
- Dash board
- WiFi router
- Important electronics for automotive safety
- Military electronics
- Detection of phase imbalance
- Computer applications
- Consumer electronics
- DVR
- Network equipment
- Precision measurement
