MAX708SCUA-TG
| Parameters | |
|---|---|
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.97V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.97V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MAX708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
MAX708SCUA-TG Overview
As you can see, this power management is mounted through 8 terminals. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 8 pins on power management. This power management has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. The power management's supply current is 16μA. It is always advisable to use MAX708, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX708SCUA-TG Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
MAX708SCUA-TG Applications
There are a lot of ON Semiconductor MAX708SCUA-TG Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Leakage current detection
- DSP
- Unattended substation automation
- Electrical fire monitoring system
- Consumer electronics
- Battery cars
- Dash board
- Detection of phase imbalance
- Data storage applications
