banner_page

MAX708SESA+

3V8 Terminals 8-Pin MAX708 Voltage supervisor1 Channels Min 1.2V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX708SESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 721
  • Description: 3V8 Terminals 8-Pin MAX708 Voltage supervisor1 Channels Min 1.2V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2010
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Additional Feature MANUAL RESET, POWER FAIL COMPARATOR
Subcategory Power Management Circuits
Max Power Dissipation 470.6mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Base Part Number MAX708
Output Push-Pull, Push-Pull
Pin Count 8
Power Supplies 3.3/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.2V
Operating Supply Current 135μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 2.93V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Supply Current-Max (Isup) 0.5mA
Min Reset Threshold Voltage 2.85V
Max Reset Threshold Voltage 3V
Undervoltage Threshold 2.85V
Overvoltage Threshold 3V
Height 1.5mm
Length 5mm
Width 4mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX708SESA+ Overview


This power management consists of 8 mounting terminals on which it can be mounted. It is packaged with Tube. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. Pin count of the power management is 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Push-Pull from this supervisor when it is operating. The power management's supply current is 135μA. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX708, which is the base power ics number. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly.

MAX708SESA+ Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
135μA operating supply current

MAX708SESA+ Applications


There are a lot of Maxim Integrated MAX708SESA+ Voltage Supervisors applications.

  • Analog circuit
  • Urban rail transit weak current power monitoring
  • Data storage applications
  • Smartphones
  • Important electronics for automotive safety
  • Precision measurement
  • Electric heating appliances
  • Insulation fault location system
  • Leakage current detection
  • Power distribution systems of infant care room

Write a review

Note: HTML is not translated!
    Bad           Good