MAX708SESA-TG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MAX708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Adjustable Threshold | YES |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.97V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.97V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX708SESA-TG Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 3.3V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 8. There are 8 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. As far as the supply current of the power management is concerned, it is 16μA. It is always advisable to use MAX708, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX708SESA-TG Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
MAX708SESA-TG Applications
There are a lot of ON Semiconductor MAX708SESA-TG Voltage Supervisors applications.
- Automotive power systems
- Linux and server computing
- Multi-voltage system
- Utility meter
- Embedded computing
- Military communications
- WiFi router
- Power distribution systems of infant care room
- Battery-powered equipment
- Smartphones
