MAX708TEUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET, POWER FAIL COMPARATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 362mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.5mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Reset Delay Time | 280 ms |
| Height | 950μm |
| Length | 3.05mm |
| Width | 3.05mm |
| RoHS Status | ROHS3 Compliant |
MAX708TEUA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tube way. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. There are 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 3V. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. There are a total of 8 pins on power management. 8 pins are present on the power management system. IC management can only work with a supply voltage of 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. The supply current of the power management is 350μA. The other features include, for example, [0], which is just one example. You can always use MAX708, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 3.3/5V volts to function properly.
MAX708TEUA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
350μA operating supply current
MAX708TEUA+ Applications
There are a lot of Maxim Integrated MAX708TEUA+ Voltage Supervisors applications.
- Leakage protection
- Electronics installed in the vehicle
- Utility meter
- Electrical fire monitoring system
- Detection of phase sequence
- Medical-specific insulation monitor
- Medical-specific isolation transformer
- Smart meter
- Automotive permanent magnet synchronous motors
- Linux and server computing
