MAX709RCSA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | 2.63 RESET THESHOLD VOLTAGE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX709 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 65μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX709RCSA Overview
Power management is mounted through 8 terminals. Packaged in a Tube-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 245 for the package during reflow. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. There are a total of 8 pins on power management. This power management has 8 pins. It is recommended that Vsup should not be less than 1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 65μA volt supply current. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using MAX709, the base power ics number. To be able to work, this power management requires 3V volts of power. At the most, voltage supervisor can work with a supply temperature of 150μA.
MAX709RCSA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
65μA operating supply current
MAX709RCSA Applications
There are a lot of Maxim Integrated MAX709RCSA Voltage Supervisors applications.
- emergency room
- Set top box
- Medical-specific isolation transformer
- Network equipment
- Fire equipment power monitoring system
- Power communication system
- Unattended substation automation
- Medical-specific insulation monitor
- Power distribution systems of ICU
- Kitchen appliances
