MAX709SCSA+
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 2.93 RESET THESHOLD VOLTAGE |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX709 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 65μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
MAX709SCSA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. A Tube package is used to package the power management. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3V volt supply. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. It has a total of 8 pins that are attached to IC management. 8 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: 0°C~70°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 65μA is the recommended value. Among other features, IC power can be also taken advantage of [0], for instance. You can always use MAX709, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 150μA can be used with this power management.
MAX709SCSA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
65μA operating supply current
MAX709SCSA+ Applications
There are a lot of Maxim Integrated MAX709SCSA+ Voltage Supervisors applications.
- Electric heating appliances
- Automotive power systems
- Kitchen appliances
- Microprocessor system
- Functional modules
- Efficient information transmission
- Automotive permanent magnet synchronous motors
- Low voltage/high power - AI, GPU
- Leakage current detection
- Set top box
