Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2012 |
JESD-609 Code |
e3 |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
HTS Code |
8542.39.00.01 |
Subcategory |
Other Analog ICs |
Voltage - Supply |
2.8V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX71020 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
3.3V |
Supply Voltage-Min (Vsup) |
3V |
Interface |
SPI |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
4.3mA |
Nominal Supply Current |
3mA |
Max Frequency |
10MHz |
Input Impedance |
50kOhm~100kOhm |
Meter Type |
Single Phase |
Measurement Error |
0.5% |
Voltage - I/O Low |
0.8V 0.96V |
Voltage - I/O High |
-1.1V 2V |
Height Seated (Max) |
1.1mm |
Length |
9.7mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX71020AEUI+ Overview
It was packaged in Tube. This package has the 28-TSSOP (0.173, 4.40mm Width) extension. This device can be used as a Single Phase meter. This item is available in Surface Mount. There is a higher operating temperature at -40°C~85°C. The unit is powered by a 2.8V~3.6V power supply. Find more similar parts by searching MAX71020. The low-level I/O ports on this PMIC have a voltage of 0.8V 0.96V. There is a voltage value of -1.1V 2V on this device as it is designed for high-level I/Os. A 28 termination is included in the part. An analog ANALOG CIRCUIT IC for PMICs. The normal voltage required for the part is 3.3V. This device may not be able to operate without a voltage of 3V or higher. In order to keep the maximum voltage that goes to the device under 3.6V, the voltage should be kept as low as possible. In this case, it is a 28 solution for logic gate applications. As it's a Surface Mount device, it makes it easy to install and detach it. It should be noted that this is a Other Analog ICs for specialized needs. The maximum supply current is recommended to be set at 4.3mA in order to make sure the PMIC keeps running normally. There is usually a need for 3.3V power supplies to power the device. As far as frequency is concerned, this device can operate up to 10MHz.
MAX71020AEUI+ Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 10MHz.
MAX71020AEUI+ Applications
There are a lot of Maxim Integrated MAX71020AEUI+ Energy Metering ICs applications.
- Power monitoring instruments
- Base Station Power Distribution Systems
- Poly-phase energy meters of class 0.5S and class 1
- Telecommunications and data communications equipment
- Power Monitoring for Home Automation
- Industrial Lighting Power Monitoring
- Telecom Infrastructure
- Power monitoring/power budgeting
- Real-Time Measurement of Input Power for AC/DC Supplies
- Intelligent Power Distribution Units