MAX710ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | MAX710 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Efficiency | 85 % |
| Voltage - Input (Max) | 11V |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 250mA |
| Voltage - Input (Min) | 1.8V |
| Input Voltage-Nom | 5.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 1.1A Switch |
| Max Output Voltage | 5V |
| Voltage - Output (Min/Fixed) | 3.3V 5V |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Nominal Output Voltage | 5V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX710ESE+ Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, there are 16 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. There is a 16-SOIC (0.154, 3.90mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. A total of 1 outputs are configured in this voltage regulator. The adjusting voltage regulator generates Fixed output. The voltage regulator 12v fits the Surface Mount mounting hole. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~85°C TA. Input voltage 1.8V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 3.3V 5V. The output current of 1.1A Switch makes dc to dc voltage regulator feature maximum design flexibility. 11V volts is DC DC switching regulator's maximum input voltage. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 5.6V is required to meet the requirements of the switching regulator operation. The regulator voltage is included in the Other Analog ICs subcategory of voltage regulators. As a member of the MAX710 family of DC/DC regulators, this is a DC/DC regulator. At 5V volts, voltage regulator can provide voltage. There are 16 pins that are used for the operation of the voltage regulator 12v. Accordingly, dc to dc voltage regulator's maximum output current is 250mA A. There is a maximum output voltage of 5V from this voltage regulator 12v.
MAX710ESE+ Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
MAX710ESE+ Applications
There are a lot of Maxim Integrated MAX710ESE+ Voltage Regulators applications.
- Power supplies of electronic gadgets
- Access control systems
- Packaging
- Textile machinery
- USB circuits
- Current source circuits
- Linear guide
- Computer monitoring equipment of building
- Lathes
- Ball screw pair
