MAX7129CPL+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Voltage - Supply | 6V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 9V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX7129 |
| Pin Count | 40 |
| Operating Supply Voltage | 14V |
| Power Supplies | 9V |
| Configuration | 7 Segment + DP |
| Operating Supply Current | 1mA |
| Max Supply Current | 1.4mA |
| Number of Bits | 4 |
| Converter Type | ADC, DUAL-SLOPE |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Display Type | LCD |
| Max Frequency | 360kHz |
| Number of A/D Converters | 1 |
| Analog Input Voltage-Max | 2V |
| Output Format | PARALLEL, WORD |
| Number of Segments | 3 |
| Touchscreen | No |
| Digits or Characters | A/D 4.5 Digits |
| Height Seated (Max) | 5.08mm |
| Length | 52.075mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX7129CPL+ Overview
As with Tube, the package is designed similarly.The package contains version 40-DIP (0.600, 15.24mm), which includes it.Display drivers has a Display type of LCD.This electronic part is mounted in the way of Through Hole.An electrical part like this operates at a temperature of 0°C~70°C.Using a 6V~14VV power source should be sufficient.Typically, 40 terminations match the impedance of transmission lines.The device belongs to the MAX7129 family.Devices are made up entirely of 40 pins.A 40 pin is used in its design.The Through Hole axis is the axis with which this electronic component is mounted on the board.The supply voltage of this device is 9V.Display drivers is necessary to provide the 1mA wDisplay driversh a supply current in order for Display drivers to perform fully as intended.3 segments refer to any member of the Seller Group's equipment solutions business that falls under the category of "Electronics.".In addition, Analog to Digital Converters can include it.To ensure high efficiency, the supply voltage should be maintained at 14V.Display drivers operates from 9V power supplies.As soon as the maximum current is supplied for its operation, the voltage reaches 1.4mA.Drivers operates wDriversh the frequency of 360kHz. There are a number of ADC, DUAL-SLOPE converters available that are based on the source input voltage and the output voltage.A 1 analog In channel is a channel in the electromagnetic spectrum that represents a bandwidth.A 4 Bit was used to design this electronic component.
MAX7129CPL+ Features
40-DIP (0.600, 15.24mm) package
MAX7129 family
40 pin count
40 pins
9V power supplies
ADC, DUAL-SLOPE converters
MAX7129CPL+ Applications
There are a lot of Maxim Integrated MAX7129CPL+ display drivers applications.
- Dlsplay Integrtty ls Compromissd
- Voltmeter
- Industrial Control Indicator
- Set-Top Boxes
- Bargraph Dlsplays
- Numerlc and Non-Numerlc Panel Dlsplays
- Vacuum Fluorescent Displays
- Industrial Controllers and Instrumentation
- COPS? or Microprocessor Displays
- Mobile projector
