MAX7219CWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 734.507795mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Additional Feature | COMMON-CATHODE |
| Subcategory | Display Drivers |
| Max Power Dissipation | 941mW |
| Technology | MOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX7219 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Output Voltage | 4.5V |
| Power Supplies | 5V |
| Configuration | 7 Segment + DP |
| Interface | 4-Wire Serial |
| Operating Supply Current | 330mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 941mW |
| Output Current | 320mA |
| Max Supply Current | 330mA |
| Min Input Voltage | 4V |
| Max Input Voltage | 5.5V |
| Output Characteristics | TOTEM-POLE |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Display Type | LED |
| High Level Output Current | -2mA |
| Low Level Output Current | 5mA |
| fmax-Min | 1.3 MHz |
| Number of Segments | 64 |
| Switching Frequency | 10MHz |
| Multiplexed Display Capability | YES |
| Digits or Characters | 8 Digits |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX7219CWG Overview
The package follows the same design pattern as Tube.A package with version 24-SOIC (0.295, 7.50mm Width) includes it.Display type LED for this electrical device.In order to mount this electronic component on the board, Surface Mount is used.This electrical part operates at 0°C~70°C degrees Celsius.Display drivers should be possible to operate Display drivers wDisplay driversh a 4V~5.5VV power source.An impedance-matching device is used to terminate transmission lines using a 24 termination.The device belongs to the MAX7219 family.A device consists solely of 24 pins.As it is designed with 24 pins, it can be mounted on a variety of surfaces.Display drivers is mounted using the Surface Mount axis on the board, so that the component can be easily removed.A voltage of 5V supplies power to it.A supply current is required for 330mA to fully function.There are 64 segments, which mean the segment of any member of the Seller Group's equipment solutions business known as the "Electronics" segment.Additionally, it can be incorporated into Display Drivers.Due to its two 5V power supplies, it can run anywhere in the world.When the maximum current required for its operation reaches 330mA, the device is considered to be operational.As a result, it provides the output voltage of 4.5V.As far as the output configuration is concerned, it has 8 output.In addition, it is characteriCOMMON-CATHODEed by the letter COMMON-CATHODE.
MAX7219CWG Features
24-SOIC (0.295, 7.50mm Width) package
MAX7219 family
24 pin count
24 pins
5V power supplies
8 output
MAX7219CWG Applications
There are a lot of Maxim Integrated MAX7219CWG display drivers applications.
- Car Audios / Radios
- Set-Top Boxes
- Panel meters
- Remote Displays
- Dlsplay Integrtty ls Compromissd
- Mobile projector
- Industrial Controllers
- Industrial Controllers and Instrumentation
- Bar Graphs and Matrix Displays
- Voltmeter
