MAX7219CWG-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Additional Feature | COMMON-CATHODE |
| Subcategory | Display Drivers |
| Max Power Dissipation | 941mW |
| Technology | MOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX7219 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Configuration | 7 Segment + DP |
| Interface | 4-Wire Serial |
| Operating Supply Current | 330mA |
| Power Dissipation | 941mW |
| Output Current | 320mA |
| Max Supply Current | 330mA |
| Min Input Voltage | 4V |
| Max Input Voltage | 5.5V |
| Output Characteristics | TOTEM-POLE |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Display Type | LED |
| High Level Output Current | -2mA |
| Low Level Output Current | 5mA |
| fmax-Min | 1.3 MHz |
| Number of Segments | 8 |
| Switching Frequency | 10MHz |
| Multiplexed Display Capability | YES |
| Digits or Characters | 8 Digits |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX7219CWG-T Overview
Display drivers is packaged in the way of Tape & Reel (TR).Display drivers is embedded in the 24-SOIC (0.295, 7.50mm Width) package.This electrical device has a display type of LED, which is the display type of the device.Display drivers is mounted on the board wDisplay driversh the help of Surface Mount.This electrical part operates at temperature 0°C~70°C.Providing that the power source is 4V~5.5VV, it should work.Typically, 24 terminations match the impedance of transmission lines.Devices from the MAX7219 family are included in this category.Display drivers is equipped wDisplay driversh 24 pin count.As a matter of fact, it has 24 pins installed.As this electronic component is mounted on the board using the Surface Mount axis, we can adjust the position of the component.There is a voltage of 5V applied to the supply voltage of this device.In order for 330mA to perform its full function, a supply current needs to be provided for it.8 segments refer to the segment of any of the Seller Group's equipment solutions business known as "Electronics".The same applies to Display Drivers.If high efficiency is to be achieved, the supply voltage should be maintained at 5.5V.Powered by two 5V power supplies, it can be operated anywhere in the world.In this case, 330mA is the maximum amount of current that can be supplied for its operation.As far as I know, it is configured with 16 output.Additionally, it is also characteriCOMMON-CATHODEed by the letter COMMON-CATHODE.
MAX7219CWG-T Features
24-SOIC (0.295, 7.50mm Width) package
MAX7219 family
24 pin count
24 pins
5V power supplies
16 output
MAX7219CWG-T Applications
There are a lot of Maxim Integrated MAX7219CWG-T display drivers applications.
- Automotive Telecom
- Set-Top Boxes
- Industrial Display
- General-purpose displays
- Instrumentation
- White Goods Industrial Weighing
- Calculators and meters
- Relay Driver
- Industrial Controllers and Instrumentation
- White Goods
