MAX7219EWG+
| Parameters | |
|---|---|
| Input Characteristics | STANDARD |
| Display Type | LED |
| High Level Output Current | -2mA |
| Low Level Output Current | 5mA |
| fmax-Min | 1.3 MHz |
| Number of Segments | 8 |
| Switching Frequency | 10MHz |
| Multiplexed Display Capability | YES |
| Digits or Characters | 8 Digits |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Additional Feature | COMMON-CATHODE |
| Subcategory | Display Drivers |
| Max Power Dissipation | 941mW |
| Technology | MOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX7219 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Configuration | 7 Segment + DP |
| Interface | 4-Wire Serial |
| Operating Supply Current | 330mA |
| Power Dissipation | 941mW |
| Output Current | 320mA |
| Max Supply Current | 330mA |
| Min Input Voltage | 4V |
| Max Input Voltage | 5.5V |
| Output Characteristics | TOTEM-POLE |
| Output Polarity | TRUE |
MAX7219EWG+ Overview
The package follows the same design pattern as Tube.There is a version 24-SOIC (0.295, 7.50mm Width) of the package that includes it as part of it.Display type LED for this electrical device.This electronic component is mounted on the board using Surface Mount.The operating temperature of this electrical part is -40°C~85°C.Display drivers should work wDisplay driversh a 4V~5.5VV power supply.Ending transmission lines with 24 terminations offers devices with the same characteristic impedance as the transmission lines themselves.Devices in the MAX7219 family include this one.The entire device is made up of 24 pins.The board is equipped with 24-pins.A Surface Mount axis is used to mount this electronic component on the board in order to get the best fit.A voltage of 5V supplies power to it.There is a need to supply 330mA with the necessary supply current for it to function at full capacity.There are 8 segments, which mean the segment of any member of the Seller Group's equipment solutions business known as the "Electronics" segment.The same applies to Display Drivers.In order to achieve high efficiency, it is recommended that the supply voltage be maintained at 5.5V.Due to its two 5V power supplies, it can run anywhere in the world.The maximum current supplied to it for operation reaches 330mA.There is a 16 output on this device.In addition, COMMON-CATHODE is a characteristic of the system.
MAX7219EWG+ Features
24-SOIC (0.295, 7.50mm Width) package
MAX7219 family
24 pin count
24 pins
5V power supplies
16 output
MAX7219EWG+ Applications
There are a lot of Maxim Integrated MAX7219EWG+ display drivers applications.
- White Goods Industrial Weighing
- Driving common-cathode LED displays
- Automotive Telecom
- Appliance control panels
- Industrial control panels
- DC Plasma Displays
- Mobile smart TV
- Smart Display
- LED Matrix Displays
- Bar-Graph Displays
