MAX741DCPP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-PDIP-T20 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 2.7V~15.5V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 2.7V |
| Topology | Buck, Boost |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | Yes |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX741DCPP Overview
With a 20-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc control's supply and operating voltages are 2.7V~15.5V. Qualified to work in a 0°C~70°C TA dc switcher. dc dc regulators can be carried out with Through Hole. In order to control switching efficiently, the dcdc regulator features Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 20 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. dc dc voltage regulators should have a minimum input voltage of 2.7V. Switching converter outputs current to the greatest value of 1A.
MAX741DCPP Features
Transistor Driver Outputs
Frequency Control, Soft Start
PULSE WIDTH MODULATION
MAX741DCPP Applications
There are a lot of Rochester Electronics, LLC MAX741DCPP DC to DC converter applications.
- Computer rooms
- Surface processing equipment
- Low output voltage switching power supply circuits
- Sensitive electronic devices
- Injection molding machinery
- Automatic plug-in machines
- Drilling machines
- Photovoltaic power
- Series voltage regulation circuits
- Power supplies of electronic gadgets
