MAX741UCAP+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 2.7V~15.5V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 2.7V |
| Topology | Buck, Boost |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | Yes |
| Length | 7.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
MAX741UCAP+ Overview
It comes in the 20-SSOP (0.209, 5.30mm Width) package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. The pmic is packaged in Tube solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 2.7V~15.5V. Suitable for work in a 0°C~70°C TA dc switcher. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Frequency Control, Soft Start which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of 20 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The minimum input voltage of the dc dc voltage regulator should be 2.7V. Whenever the current value is 1A, switching converter outputs the highest possible value.
MAX741UCAP+ Features
Transistor Driver Outputs
Frequency Control, Soft Start
PULSE WIDTH MODULATION
MAX741UCAP+ Applications
There are a lot of Rochester Electronics, LLC MAX741UCAP+ DC to DC converter applications.
- Photovoltaic power
- Current source circuits
- PSRR circuits
- Low output voltage switching power supply circuits
- Die casting equipment
- Driver circuits
- Magnetohydrodynamic power
- seismic instrument power circuits
- Combined machine tools
- Planers
