MAX741UCPP+
| Parameters | |
|---|---|
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 2.7V~15.5V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 2.7V |
| Topology | Buck, Boost |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 3.5mA |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | Yes |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX741 |
| JESD-30 Code | R-PDIP-T20 |
MAX741UCPP+ Overview
It comes in the 20-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tube enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 2.7V~15.5V and has a 2.7V~15.5V supply voltage. Qualified to work in an dc switcher with 0°C~70°C TA. dc dc regulator can be generalized using Through Hole. Switching control is made easier with the dcdc regulator's Frequency Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 20 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. MAX741 can be used to locate other relevant dc to dc converter ics. It is recommended to use 2.7V as the minimum input voltage of dc dc voltage regulator. The output of this function is the greatest value of 1A. 3.5mA more than 3.5mA current should be supplied to the controller.
MAX741UCPP+ Features
Transistor Driver Outputs
Frequency Control, Soft Start
PULSE WIDTH MODULATION
MAX741UCPP+ Applications
There are a lot of Maxim Integrated MAX741UCPP+ DC to DC converter applications.
- Terrestrial set-top boxes
- Smart grid
- Experimental setup
- Electric water heaters
- CMM
- Special machining machine tools
- Alternators
- Refrigerators of central air conditioners
- USB circuits
- Digital precision reference circuits
