MAX743CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 200kHz |
| Base Part Number | MAX743 |
| Function | Step-Up |
| Number of Outputs | 2 |
| Efficiency | 82 % |
| Voltage - Input (Max) | 6V |
| Output Voltage | 15V |
| Output Type | Programmable |
| Max Output Current | 125mA |
| Voltage - Output 1 | 15V |
| Voltage - Input (Min) | 4.2V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive and Negative (Dual Rail) |
| Current - Output | 2A Switch |
| Voltage - Output 2 | 12V |
| Voltage - Output (Min/Fixed) | ±12V ±15V |
| Topology | Boost, Buck-Boost |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 30mA |
| Current - Output 1 | 125mA |
| Synchronous Rectifier | No |
| Min Output Voltage | 15V |
| Current - Output 2 | 125mA |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX743CPE+ Overview
For optimal performance, this voltage regulator makes use of the Tube package. In this voltage regulator, 16 terminations are present. There is a DUAL SWITCHING CONTROLLER type analog IC in this voltage regulator 12v that is used to convey analog signals. Space-saving 16-DIP (0.300, 7.62mm) packages are available for this harley voltage regulator. A total of 2 outputs are configured in this voltage regulator. On its output pins, this adjusting voltage regulator generates Programmable output. This switching regulator is designed to fit the Through Hole mounting system. Voltage regulators should be operated at 0°C~70°C TA temperature while operating. The voltage regulator can be operated with a voltage as low as 4.2V as an input voltage. The output voltage of this voltage regulator (Min/Fixed) amounts to ±12V ±15V volts. A maximum design flexibility is provided by the 2A Switch output current of voltage regulator. The maximum input voltage of voltage regulator is 6V. Its 260 peak reflow temperature makes this regulator essentially indestructible. An input voltage of 5V is required to meet the requirements of the switching regulator operation. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. DC/DC regulators of this type are part of the MAX743 family of voltage regulator 12vs. The voltage DC DC switching regulator can provide is up to 15V volts. During switching regulator operation, 16 pins are used. As a general rule, this voltage regulator 12v should keep its output voltage at least at 15V. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 125mA A. It is capable of maintaining high accuracy with the dc to dc voltage regulator's frequency of 200kHz.
MAX743CPE+ Features
2 outputs
Peak reflow temperature (Cel) of 260
16 pins
MAX743CPE+ Applications
There are a lot of Maxim Integrated MAX743CPE+ Voltage Regulators applications.
- Thermal power
- Digital video recorders
- Solar power plants
- Emergency lighting monitoring equipment
- Milling machines
- Remotely powered electric motors
- Terrestrial set-top boxes
- Sink circuits
- Computer-related products
- Wide-range voltage regulation circuits
