Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Number of Pins |
16 |
Weight |
473.692182mg |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Current Rating |
30mA |
Frequency |
200kHz |
Base Part Number |
MAX743 |
Function |
Step-Up |
Number of Outputs |
2 |
Voltage - Input (Max) |
6V |
Output Voltage |
15V |
Output Type |
Programmable |
Max Output Current |
2A |
Voltage - Output 1 |
15V |
Voltage - Input (Min) |
4.2V |
Input Voltage-Nom |
5V |
Max Supply Voltage |
7V |
Analog IC - Other Type |
DUAL SWITCHING CONTROLLER |
Output Configuration |
Positive and Negative (Dual Rail) |
Current - Output |
2A Switch |
Max Output Voltage |
15V |
Voltage - Output 2 |
12V |
Voltage - Output (Min/Fixed) |
±12V ±15V |
Topology |
Boost, Buck-Boost |
Control Mode |
CURRENT-MODE |
Control Technique |
PULSE WIDTH MODULATION |
Current - Output 1 |
125mA |
Synchronous Rectifier |
No |
Min Output Voltage |
15V |
Current - Output 2 |
125mA |
Length |
10.67mm |
Width |
7.6mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX743CWE+ Overview
A Tube package is used in this voltage regulator to optimize performance. There are 16 terminations in this voltage regulator. There are two types of analog ICs in this voltage regulator 12v: DUAL SWITCHING CONTROLLER ICs, which are the ones used in older voltage regulator 12vs. There is a 16-SOIC (0.295, 7.50mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. 2 outputs have been configured in the voltage regulator 12v. Adjusting voltage regulator's output pins generate Programmable output. There is a switching regulator that is compatible with the Surface Mount mounting. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at 0°C~70°C TA. A dc to dc voltage regulator's minimum input voltage of 4.2V is required for this voltage regulator to operate. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to ±12V ±15V. Featuring a maximum design flexibility of 2A Switch, dc to dc voltage regulator has a maximum output current of 2A Switch. There is a maximum input voltage of 6V for this voltage regulator 12v. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. For operation, switching regulator requires a nominal input voltage of 5V. Listed under the subcategory of Switching Regulator or Controllers is this voltage regulator 12v. In the particular voltage regulators, the MAX743 family is represented. The voltage DC DC switching regulator can provide is up to 15V volts. In order to operate voltage regulator, 16 pins are required. In order for this switching regulator to work properly, the output voltage should be at least 15VV. Accordingly, dc to dc voltage regulator's maximum output current is 2A A. It provides the adjusting voltage regulator's maximal output voltage of 15V. A maximum supply voltage of 7V is required for adjusting voltage regulator to operate. It is capable of maintaining high accuracy with the dc to dc voltage regulator's frequency of 200kHz.
MAX743CWE+ Features
2 outputs
Peak reflow temperature (Cel) of 260
16 pins
MAX743CWE+ Applications
There are a lot of Maxim Integrated MAX743CWE+ Voltage Regulators applications.
- Remotely powered electric motors
- Correction machines
- Wide-range voltage regulation circuits
- Computer application technology
- Lathes
- PSRR circuits
- Mobile phones
- Magnetohydrodynamic power
- Medical equipment
- Computer-related products