MAX753ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO HAS CONTROL TECHNIQUE OF RESONANT |
| HTS Code | 8542.31.00.01 |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Voltage - Supply | 4V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX753 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | FLUORESCENT LIGHT CONTROLLER |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Control Technique | PULSE FREQUENCY MODULATION |
| Switcher Configuration | PUSH-PULL |
| Display Type | CCFL - Cold Cathode Fluorescent Lamp |
| Max Frequency | 115kHz |
| Switching Frequency-Max | 80kHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX753ESE+ Overview
Display drivers is designed similarly to Tube.Display drivers is included in the package of version 16-SOIC (0.154, 3.90mm Width), so you can install Display drivers from there.As far as the display type of this electrical device is concerned, it is CCFL - Cold Cathode Fluorescent Lamp.Mounting this electronic component on the board is done using Surface Mount.Display drivers is recommended that this electrical part be operated at a temperature of -40°C~85°C.Display drivers should work wDisplay driversh a 4V~30VV power supply.An impedance-matching device is used to terminate transmission lines using a 16 termination.The device belongs to the MAX753 family.Devices are made up entirely of 16 pins.A Surface Mount axis is used to mount this electronic component on the board in order to get the best fit.In order for 500μA to perform its full function, a supply current needs to be provided for it.The supply voltage should be maintained at 5V for high efficiency.With a frequency of 115kHz, it operates at a specific rate.Drivers is also characteriALSO HAS CONTROL TECHNIQUE OF RESONANTed by ALSO HAS CONTROL TECHNIQUE OF RESONANT.
MAX753ESE+ Features
16-SOIC (0.154, 3.90mm Width) package
MAX753 family
16 pin count
MAX753ESE+ Applications
There are a lot of Maxim Integrated MAX753ESE+ display drivers applications.
- Display Driver
- Professional Audio Equipment
- Bargraph Dlsplays
- Climate Controls
- High and Low Temperature Envlronment s where LCD
- Voltmeter
- Dlsplay Integrtty ls Compromissd
- Battery Operated Products
- Car Audios / Radios
- Mobile smart TV
