MAX764EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX764 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -16V |
| Output Type | Adjustable (Fixed) |
| Max Output Current | 260mA |
| Operating Supply Voltage | 16V |
| Voltage - Input (Min) | 3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Negative |
| Max Output Voltage | -16V |
| Voltage - Output (Min/Fixed) | -1V -5V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | -1V |
| Max Output Power | 1.5W |
| Nominal Output Voltage | -5V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX764EPA+ Overview
For optimal performance, this voltage regulator uses the Tube package. Throughout this voltage regulator, there are 8 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. In order to save space, this harley voltage regulator is available in the 8-DIP (0.300, 7.62mm) package. There are 1 outputs configured on the voltage regulator. As you can see, this DC DC switching regulator generates Adjustable (Fixed) output on its output pins. As the name implies, this voltage regulator 12v is designed for mounting on a Through Hole bracket. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. There is a switching frequency of 300kHz for this voltage regulator 12v. A dc to dc voltage regulator's minimum input voltage of 3V is required for this voltage regulator to operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to -1V -5V. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. There is a subcategory called Switching Regulator or Controllers that includes this voltage regulator. DC/DC regulators of this type are part of the MAX764 family of voltage regulator 12vs. The adjusting voltage regulator's output voltage is maintain at -16V. In order to operate voltage regulator, there are 8 pins that must be connected. This voltage regulator 12v should be configured with an output voltage that is at least -1V. Voltage regulator's maximal output current reaches 260mA A to meet the operation requirements. Using this voltage regulator 12v, you will be able to get the maximum output voltage of -16V. Switching regulators operate at 16V supply voltages.
MAX764EPA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 16V
MAX764EPA+ Applications
There are a lot of Maxim Integrated MAX764EPA+ Voltage Regulators applications.
- Machining centers
- Network technology
- Special machining machine tools
- Servo drive system
- Television equipment
- Elevator lighting
- Planers
- Grinders
- Household control circuits
- Shearing machines
