MAX764ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 300kHz |
| Base Part Number | MAX764 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Output Voltage | -5V |
| Output Type | Adjustable (Fixed) |
| Max Output Current | 260mA |
| Operating Supply Voltage | 16V |
| Voltage - Input (Min) | 3V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 90μA |
| Output Configuration | Negative |
| Current - Output | 260mA |
| Max Output Voltage | -1V |
| Voltage - Output (Min/Fixed) | -1V -5V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | -16V |
| Max Output Power | 1.5W |
| Nominal Output Voltage | -5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX764ESA+ Overview
For optimal performance, this voltage regulator uses the Tube package. During the development of this harley voltage regulator, 8 terminations were made. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. In order to save space, this harley voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) package. There are 1 outputs configured on the voltage regulator. Adjustable (Fixed) outputs are generated on the output pins of this adjusting voltage regulator. Switching regulators like this one can be mounted on the Surface Mount mounting system. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 3V. The output voltage of this voltage regulator (Min/Fixed) amounts to -1V -5V volts. This voltage regulator 12v features maximum design flexibility thanks to its 260mA output current. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. There is a DC/DC regulator in this family that belongs to the MAX764 family. The voltage DC DC switching regulator can produce is -5V volts. The switching regulator operation is carried out by 8 pins. For this switching regulator, it is recommended that the output voltage is at least -16V volts. A 260mA A maximum output current is required to meet the switching regulator operation requirements. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of -1V. Switching regulators such as this operate from voltages of 16V. The dc to dc voltage regulator's minimum supply voltage of 3V volts ensures reliable performance. A frequency of 300kHz allows dc to dc voltage regulator to maintain high accuracy.
MAX764ESA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 16V
MAX764ESA+ Applications
There are a lot of Maxim Integrated MAX764ESA+ Voltage Regulators applications.
- Planers
- Packaging
- Electric water heaters
- Radio equipment
- Servo drive system
- Die casting equipment
- Analog precision reference circuits
- Printing equipment
- Low output voltage switching power supply circuits
- Overvoltage protection circuits in TV sets
