MAX766CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX766 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -15V |
| Output Type | Adjustable (Fixed) |
| Max Output Current | 260mA |
| Operating Supply Voltage | 16V |
| Voltage - Input (Min) | 3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Negative |
| Current - Output | 105mA |
| Max Output Voltage | -16V |
| Voltage - Output (Min/Fixed) | -1V -15V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | -1V |
| Max Output Power | 1.5W |
| Nominal Output Voltage | -15V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX766CPA+ Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. In this voltage regulator, there are a total of 8 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space-saving 8-DIP (0.300, 7.62mm) packages are available for this harley voltage regulator. There are 1 outputs configured on the voltage regulator. Adjusting voltage regulator's output pins generate Adjustable (Fixed) output. The voltage regulator 12v fits the Through Hole mounting hole. 0°C~70°C TA should be the operating temperature when voltage regulator is operating. A DC-DC switching regulator of this type operates at a switching frequency of 300kHz. Voltage regulators like this one can operate at least with 3V as the dc to dc voltage regulator's minimum input voltage. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is -1V -15V. This voltage regulator 12v offers maximum design flexibility with an output current of 105mA. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. The MAX766 family of DC/DC regulators includes this DC/DC regulator. There is a possibility that DC DC switching regulator can give voltage at -15V volts. The switching regulator operation of the system is controlled by 8 pins. Ideally this switch regulator should have an output voltage of about -1V at the very least. The maximum output current reaches 260mA A to meet the switching regulator operation requirements. There is a maximum output voltage of -16V from this voltage regulator 12v. DC-DC switching regulator with 16V supply voltage.
MAX766CPA+ Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 16V
MAX766CPA+ Applications
There are a lot of Maxim Integrated MAX766CPA+ Voltage Regulators applications.
- Network technology
- Grinders
- Digital display device
- Photovoltaic power
- Product testing
- Household control circuits
- Post equipment
- Smart grid
- Electrical power transmission
- Alternators
