MAX767EAP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX767 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.35V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 340kHz |
| Duty Cycle (Max) | 95% |
| Length | 7.2mm |
| Width | 5.29mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX767EAP+T Overview
Capsuled in the 20-SSOP (0.209, 5.30mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. Tape & Reel (TR) solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). 4.5V~5.5V is the operating voltage and supply voltage of the dc control. Suitable for working in an dc switcher that has a -40°C~85°C TA. The switching controller is capable of switching at the 200kHz 300kHz position. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Enable, Soft Start is included in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 20 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 5V. Other relevant dc to dc converter ics will be returned if you search "MAX767". 20 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. According to the test statistics, DC regulator outputs 3.35V voltage. If you start a project, note down the dc dc regulator's usual output current of 10A. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 340kHz for this dc regulators. A circuit should contain 5.5V in order to ensure the voltage regulator dc to dc runs safely and reliably.
MAX767EAP+T Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz
Enable, Soft Start
PULSE WIDTH MODULATION
MAX767EAP+T Applications
There are a lot of Maxim Integrated MAX767EAP+T DC to DC converter applications.
- Automatic plug-in machines
- Gear/thread machining machines
- Household control circuits
- Magnetohydrodynamic power
- Smoke exhaust equipment
- Various CNC machine tools
- Experimental setup
- Packaging
- Radio equipment
- Computer-related products
