banner_page

MAX7705CSA+

5V8 Terminals 8-Pin MAX7705 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX7705CSA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 962
  • Description: 5V8 Terminals 8-Pin MAX7705 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1995
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Max Power Dissipation 471mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX7705
Output Push-Pull, Totem Pole
Pin Count 8
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 150μA
Max Supply Current 150μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 4.65V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Length 4.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX7705CSA+ Overview


It is mounted through 8 terminals on the power management. A Tube package is used to package the power management. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 5V volt supply. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Taking into account all of the pins, this power management has a total of 8. 8 pins make up the power management. IC management can only work with a supply voltage of 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The power management's supply current is 150μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX7705, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 150μA.

MAX7705CSA+ Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
150μA operating supply current

MAX7705CSA+ Applications


There are a lot of Maxim Integrated MAX7705CSA+ Voltage Supervisors applications.

  • DC stabilized power supply module
  • Consumer electronics
  • Utility meter
  • DSP
  • Automotive power systems
  • Medical-specific isolation transformer
  • Power distribution systems of infant care room
  • Refrigeration
  • External alarm
  • Display equipment

Write a review

Note: HTML is not translated!
    Bad           Good