MAX770CSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 300kHz |
| Base Part Number | MAX770 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Output Current | 2A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 3V~16.5V |
| Control Features | Enable |
| Max Output Voltage | 2V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 16.5V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 100V |
| Duty Cycle | 90 % |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX770CSA+ Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. A 3V~16.5V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. A variety of 8 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE FREQUENCY MODULATION. DC switcher's input voltageis 5V volts. Search for "MAX770" to find other relevant dc to dc converter ics. 8 pins are on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Statistically, DC regulator outputs 5V volts. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controllers operate at 300kHz frequencies. In order to limit the voltage of a dc switcher whose maximum input voltage is 16.5V, it must be limited by the user. Input current cannot exceed 2A with this dc switcher. At its maximum output, the switching converter can provide 2V volts. 100V voltage output is lower than 100V.
MAX770CSA+ Features
Transistor Driver Outputs
Enable
PULSE FREQUENCY MODULATION
Frequency: 300kHz
MAX770CSA+ Applications
There are a lot of Maxim Integrated MAX770CSA+ DC to DC converter applications.
- Television equipment
- Geothermal power
- Experimental setup
- Mobile phones
- Radio equipment
- Product burn-in
- Linear guide
- Motor controller circuits
- Surge protection circuits
- Production lines
