MAX773CPD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | SELECTABLE REGULATING VOLTAGE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Frequency | 300kHz |
| Base Part Number | MAX773 |
| Function | Step-Up |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Max Output Current | 1A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 3V~16.5V |
| Control Features | Enable, Low Battery |
| Max Output Voltage | 15V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 16.5V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 5V |
| Duty Cycle | 90 % |
| Number of Output Phases | 1 |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX773CPD+ Overview
Capsuled in the 14-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. Tube is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 3V~16.5V. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Enable, Low Battery is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 14 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE FREQUENCY MODULATION. It is inputted with a DC switcher's voltage of 5V. In addition to "MAX773", there are other relevant dc to dc converter ics you can find. 14 pins are present on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. A 15V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. Having a Through Hole makes DC switcher ideal for most prototype and application designs. The switching controller works at a frequency of 300kHz. The value of DC to DC voltage regulator is set at SELECTABLE REGULATING VOLTAGE in order to fulfill the requirements more effectively. The dc switcher's maximum input voltage is 16.5V; users must limit it accordingly. DC switchers cannot produce output currents greater than 1A. At its maximum output, the switching converter can provide 15V volts. The voltage controller's lowest voltage output is not less than 5V. During switching, this controller has a phase of 1.
MAX773CPD+ Features
Transistor Driver Outputs
Enable, Low Battery
PULSE FREQUENCY MODULATION
Frequency: 300kHz
SELECTABLE REGULATING VOLTAGE
MAX773CPD+ Applications
There are a lot of Maxim Integrated MAX773CPD+ DC to DC converter applications.
- Elevator lighting
- Industrial controllers
- Wind power
- Shearing machines
- Computer rooms
- Laboratories
- Digital video recorders
- Die casting equipment
- Correction machines
- Various precision measuring detectors
