MAX776CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX776 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Negative |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 3V~16.5V |
| Control Features | Enable |
| Topology | Buck-Boost |
| Min Input Voltage | 3V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 16.5V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 300kHz |
| Nominal Output Voltage | -15V |
| Duty Cycle | 85 % |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX776CPA+ Overview
With a 8-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Tube surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 3V~16.5V. A 0°C~70°C TA dc switcher is not a problem. The Through Hole value makes it suitable for general dc dc regulator. Enable is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE FREQUENCY MODULATION. DC switcher's input voltageis 5V volts. MAX776 can be searched for other relevant dc to dc converter ics. Pins number 8 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. A -15V voltage of DC regulator was detected in the test statistics. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. Having a Through Hole makes DC switcher ideal for most prototype and application designs. DC regulator has a maximum frequency of 300kHz. Since the dc switcher's maximum input voltage is 16.5V, the voltage must be regulated accordingly. Voltage 3V must be supplied.
MAX776CPA+ Features
Transistor Driver Outputs
Enable
PULSE FREQUENCY MODULATION
MAX776CPA+ Applications
There are a lot of Maxim Integrated MAX776CPA+ DC to DC converter applications.
- Automatic testing equipment
- Smart grid
- Post equipment
- Energy management systems
- Window air conditioners
- Drilling machines
- Communication system
- Electrical distribution systems
- Experimental setup
- Smoke exhaust equipment
