MAX791EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX791 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX791EPE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Packaging is in the form of a Tube. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a 16-DIP (0.300, 7.62mm) package. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Through Hole. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 16 pins. There are 16 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Through Hole. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 150μA for the power management. It is always advisable to use MAX791, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 5V power to power this power management. The maximum supply temperature that PMIC chip can work with is 150μA.
MAX791EPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
150μA operating supply current
MAX791EPE+ Applications
There are a lot of Maxim Integrated MAX791EPE+ Voltage Supervisors applications.
- Magnetic resonance imaging
- DSP
- Consumer electronics
- Data storage applications
- Electrical fire monitoring system
- Display equipment
- Military electronics
- Refrigeration
- Automotive power systems
- Battery cars
