MAX791ESE+
| Parameters | |
|---|---|
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX791 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 150μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 696mW |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
MAX791ESE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Packaging is in the form of a Tube. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. Please find attached 16-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. In total, it has 16 pins on IC management. This power management system has 16 pins. IC management can only work with a supply voltage of 0V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 150μA. You can always use MAX791, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 5V volts of power. At the most, voltage supervisor can work with a supply temperature of 150μA.
MAX791ESE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
150μA operating supply current
MAX791ESE+ Applications
There are a lot of Maxim Integrated MAX791ESE+ Voltage Supervisors applications.
- Consumer electronics
- Radar
- Stable power system
- Power distribution systems of infant care room
- Utility meter
- DC stabilized power supply module
- Smart meter
- Battery cars
- Unattended substation automation
- Cloud computing
