MAX792MCSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX792 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX792MCSE+ Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. A Tube package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached 16-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 5V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. There are a total of 16 pins on power management. Power managment ic pin count is 16. A voltage (Vsup) that doesn't fall below 2.75V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to 0°C~70°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Push-Pull. For this power management, there is an 150μA volt supply current. You can always use MAX792, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 3/5V watts is required for the operation of this power management. Voltage supervisor can work with a supply temperature of 150μA at the most.
MAX792MCSE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX792MCSE+ Applications
There are a lot of Maxim Integrated MAX792MCSE+ Voltage Supervisors applications.
- Satellite navigation
- Power distribution systems of ICU
- Sensitive sensors
- Set top box
- Microprocessor system
- Smartphones
- Household appliances
- Radar
- Military electronics
- Medical-specific insulation monitor
