MAX792MEPE+
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | 4.37V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.37V; MANUAL RESET INPUT |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
MAX792MEPE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for PDIP functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 16 pins on IC management. 16 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2.75V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The supply current of the power management is 150μA. In addition, IC management are other features such as [0], to mention only a few. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 150μA can be used with this power management.
MAX792MEPE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX792MEPE+ Applications
There are a lot of Maxim Integrated MAX792MEPE+ Voltage Supervisors applications.
- Microcontroller system
- Power distribution systems of infant care room
- Military communications
- Leakage protection
- DC stabilized power supply module
- Electric heating appliances
- Leakage current detection
- Household appliances
- Low voltage/high power - AI, GPU
- Display equipment
