MAX792RCPE
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX792 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.61V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX792RCPE Overview
A total of 16 terminals are used to mount this power management. There is a Tube-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 16-DIP (0.300, 7.62mm) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 245 is specified for the package. During operation, the power ic is supplied with a voltage of 5V. IC management conducts in a 1-voltage supply. Through Hole is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 16. 16 pins are on the supervisor. IC management can only work with a supply voltage of 2.75V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleThis range of temperature should be set for the supervisors: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Push-Pull. The supply current of the power management is 150μA. A similar IC managements number of the manufacturer can always be found by using MAX792, the base power ics number. A power supply of 3V watts is required for the operation of this power management. Voltage supervisor can work with a supply temperature of 150μA at the most.
MAX792RCPE Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX792RCPE Applications
There are a lot of Maxim Integrated MAX792RCPE Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Solar power charger
- Detection of phase loss
- Sensitive sensors
- Important electronics for automotive protection
- Cloud computing
- Kitchen appliances
- Electronics installed in the vehicle
- WiFi router
- Leakage current detection
