MAX792SCSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX792 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.91V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX792SCSE+ Overview
As you can see, this power management is mounted through 16 terminals. There is a Tube-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. In a 5V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 16 pins in it. 16 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.75V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Push-Pull. The supervisor's supply current is specified to 150μA. To find similar IC managements from the manufacturer, you can always search by MAX792. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. At the most, voltage supervisor can work with a supply temperature of 150μA.
MAX792SCSE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX792SCSE+ Applications
There are a lot of Maxim Integrated MAX792SCSE+ Voltage Supervisors applications.
- Important electronics for automotive safety
- Medical-specific insulation monitor
- Dash board
- Leakage protection
- Solar power charger
- Electronics installed in the vehicle
- Satellite navigation
- Radio
- Refrigeration
- Embedded computing
