MAX792SESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX792 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.75V |
| Operating Supply Current | 150μA |
| Max Supply Current | 150μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.91V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX792SESE+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. Packaging is in the form of a Tube. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a 16-SOIC (0.154, 3.90mm Width) package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 5V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 16 pins. This power management system has 16 pins. It is recommended that Vsup should not be less than 2.75V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. Supplied with a operating current of 150μA, this PMIC is capable of fully function as specified. You can always use MAX792, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 3/5V volts to function properly. The maximum supply temperature voltage supervisor can handle is 150μA.
MAX792SESE+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current
MAX792SESE+ Applications
There are a lot of Maxim Integrated MAX792SESE+ Voltage Supervisors applications.
- Power distribution systems of infant care room
- Power distribution systems of ICU
- Battery cars
- Stable power system
- Important electronics for automotive protection
- Electrical fire monitoring system
- Embedded computing
- Kitchen appliances
- Transformer load monitoring equipment
- DC stabilized power supply module
