MAX793RCSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX793 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 62μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.08mA |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.72V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX793RCSE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Power management is packaged in a Tube way. As a reference, this IC management includes 1 functions for your convenience. A series of 2 channels can be found on this supervisor. In this PMIC, you can find 16-SOIC (0.154, 3.90mm Width) functions for your reference. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 3V volt supply. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 16. 16 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be 0°C~70°C TA. There is an output voltage of Open Drain, Push-Pull from this supervisor when it is operating. There is a supply current of 62μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX793, which is the base power ics number. To operate this power management, you will need at least 3/5V volts of power.
MAX793RCSE+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
62μA operating supply current
MAX793RCSE+ Applications
There are a lot of Maxim Integrated MAX793RCSE+ Voltage Supervisors applications.
- Sensitive sensors
- Consumer electronics
- Efficient information transmission
- Medical-specific insulation monitor
- Power distribution systems of operating room
- Linux and server computing
- Kitchen appliances
- Military communications
- Analog circuit
- Microprocessor system
