MAX793REPE+
| Parameters | |
|---|---|
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX793 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 62μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.08mA |
MAX793REPE+ Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tube-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 2 channels that can be found. IC management is packaged as a 16-DIP (0.300, 7.62mm) package. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. According to the specification, the package's peak reflow temperature is specified to be 260. In a 3V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Through Hole-axis. This power ic can be sub-categorized as Power Management Circuits. There are a total of 16 pins on power management. This power management has 16 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Through Hole is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain, Push-Pull during operation. The supply current of the power management is 62μA. A similar IC managements number of the manufacturer can always be found by using MAX793, the base power ics number. It requires 3/5V watts of power to operate this voltage supervisor.
MAX793REPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
62μA operating supply current
MAX793REPE+ Applications
There are a lot of Maxim Integrated MAX793REPE+ Voltage Supervisors applications.
- Detection of phase sequence
- emergency room
- Military electronics
- Urban rail transit weak current power monitoring
- FPGA design
- Analog circuit
- Detection of phase loss
- Refrigeration
- DVR
- Utility meter
