MAX793SEPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 62μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.08mA |
| Threshold Voltage | 2.925V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX793SEPE+ Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tube model. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 2 channels, each of which can be used independently. Please find attached PDIP functions for your reference in this IC power. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 3.3V supply voltages. Power ics operate at 1 supply voltages. The power management is mounted by a Through Hole-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 16. This power management system has 16 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). For this power management, there is an 62μA volt supply current. To be able to work, this power management requires 3.3/5V volts of power.
MAX793SEPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
62μA operating supply current
MAX793SEPE+ Applications
There are a lot of Maxim Integrated MAX793SEPE+ Voltage Supervisors applications.
- Satellite navigation
- Magnetic resonance imaging
- DC stabilized power supply module
- Multi-voltage system
- Electrical fire monitoring system
- Data storage applications
- Power communication system
- Rechargeable batteries
- Leakage protection
- Automotive permanent magnet synchronous motors
